DX-100 Single-window video processor for LED displays

Name: DX-100 Single-window video processor for LED displays
Brand: Barco
Availability: OutOfStock

OTRZYMAJ RABAT DODATKOWY NAWET 40%_{* W każdej chwili możesz się wypisać}

Cena na telefon

Produkt niedostępny

Input	SDI 8NTSC/PAL per SMPTE 259M HD 720p per SMPTE 296M / HD 1080i per SMPTE 292M DVI RGB/YCbCr All supported to maximum pixel rate: Single link (165MHz) / Dual link (240MHz)
Output	Removable NNI Proprietary Barco format on an HDMI connector Up to 2048 pixels either horizontally or vertically. Maximum active area: 768K pixels 12 bits per RGB per pixel DVI Proprietary Barco format on an DVI connector Up to 2048 pixels either horizontally or vertically. Maximum active area: 3x 480K pixels
Processing	Number of layers: 1 Number of layers: 1 Ext. Genlock: Composite sync signal (standard or tri -level) or black burst. Termination is 75 ohms, +/- 0.1%. Video Delay Min. delay mode: 2 ms Video Delay Min. delay mode: 2 ms Reduced delay mode Progressive sources: 2ms Interlaced sources: 23ms @ 50Hz / 19ms @ 60Hz
Physical and Electrical	Power Input: 100-240 VAC, 50-60 Hz Power consumption: 180 watts maximum Mechanical: H: 8.75 inches (22.22 cm) W: 17.00 inches (43.18 cm) W: 19.00 inches (48.26 cm) with rackmount wings D: 17.00 inches (43.18 cm), excluding connectors and latches 5RU rackmount Temperature: 0-40 degrees C Humidity: 0-95% non-condensing Chassis Weight: 52 lbs. (23.6 kg)

Sprawdź czy nie potrzebujesz